Tie Rod Load Cell
- Accurately Measure Steering Loads
- Indirectly Measure Front Tire Grip
- Quantify Results of Setup Changes
- Validate Simulation Results
- Direct Replacement for NASCAR® Tie Rods
- Internal Microprocessor controlled Amplifier
- 0.1 to 4.9v Output
- 8 - 36 vdc Supply
- Optional User selectable Load Ranges
- Manufactured, Serviced and Supported in the USA
RAETECH's Tie Rod Load Cell is designed to accurately and reliably measure steering loads on stock cars. A significant amount of lateral force is reacted through the tie rod. Tie rod loads can give a great deal of insight into tire grip.
Like most of our load cell line, this is a direct bolt-in replacement for the standard part, using a ¾-16 fine thread. Precision machined from 7075 T6 aluminum and designed with a high safety factor, RAETECH's Tie Rod Load Cells have been in use by many teams since their introduction in 2006.
Tie Rod Load Cells are supplied with integrated amplifiers that provide a 0.1 - 4.9V output. Alternate gains and offsets are user configurable with the optional SG Amp Programmer.
Detailed calibration information comes with each of our load cells and most 12-bit data acquisition systems will yield about 1 lb/count resolution. RAETECH engineers are always pleased to discuss how our load sensing equipment can best help your race program.
Download Tie Rod Data Sheet Now available in two lengths; 7 3/4" and 8 3/4"
|Tie Rod Load Cell|
|Calibrated Range||±2,500 lbs|
|Static Error Band % F.S.||±0.25%|
|Non-Linearity % F.S.||±0.20%|
|Hysteresis % F.S.||±0.15%|
|Calibrated Range||50 to 260°F (10 to 125°C)|
|Operating Range||0 to 300°F (-18 to 150°C)|
|Zero Drift %R.O./°F||±0.002%|
|Span Shift %/°F||±0.008%|
|Output Range||0.1 - 4.9 V|
|Sensitivity (lb/v)||1000 typ.*|
|No Load Output||2.5 V typ.*|
|Supply Power (unregulated)||8 - 36 Vdc|
|Safe Overload Capacity||300%|
|Weight||6.3 & 5.5 oz|
|Tie Rod Length (8.75”)||1169-01-01-302|
|Tie Rod Length (7.75”)||1169-01-01-303|
|Programmer - SG Amplifier||1169-01-50-300|
* Programmed to Customer Specification or User Configurable with Optional Programmer
For Additional Information or to Order Load Sensing Products Please Contact:
4750 Venture Dr. Suite 100, Ann Arbor, MI 48108